| About |
|---|
| Liquid silicone rubber material for kitchenwares Product Description SQUARE® LIM3919-XXA/B is high strength 2-part liquid silicone rubber suitable for injection molding processes, catalyzed by platinum. Key Features Good rebound property Excellent thermal and cold stability(-60°C to 250°C) Low yellowing Outstanding resistance to ageing Meeting US FDA CFR21. Part .177.2600,EN14350.2 At the temperature of 20°C and in the condition of air-proof, the shelf life is 5 days after mixing A and B, the shelf life will decrease with the increasing of the temperature. Applications SQUARE® LIM3919-XXA/B is suitable for making kitchenwares.&& |
| Product Description | |
|---|---|
| Supplier | SQUARE |
| Generic | 硅橡胶,LSR |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Heat Stabilized |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Liquid injection molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.08 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | 2.0 | % | JIS K6301 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 40 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 5.50 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 400 | % | ASTM D412 |
| tear strength | 13.0 | kN/m | ASTM D624 |
| Compression deformation | |||
| 175℃，22 hr | 10 | % | DIN 53517 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermosetting components | |||
| Component A | 按重量计算的混合比: 1.0 | ||
| Component B | 按重量计算的混合比: 1.0 | ||
| storage stability | |||
| 20 ℃ | 7200 | min | |
| Storage period | 52 | wk |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| viscosity | 300 | Pa·s | DIN 53019 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die B |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |