| About |
|---|
| Addition type electronic encapsulation silicone gel for PCB Product description The product is one kind of 2-part additional type liquid silicone rubber, catalyzed by platinum, mixing ratio of parts A:B=1:1, cured under room temperature or heat cure under low temperature. Key Features Good light transmittance, non-toxic and eco-friendly. Application Electronic encapsulation silicone gel for PCB&& |
| Product Description | |
|---|---|
| Supplier | SQUARE |
| Generic | 硅橡胶,LSR |
| Material Status | Commercial: Active |
| Features | Good Clarity,Baking,Nontoxicity,Room temperature cure |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| Thermosetting components | |||
| Component A | 按重量计算的混合比: 1.0 | ||
| Component B | 按重量计算的混合比: 1.0 | ||
| Storage period | 52 | wk | |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| viscosity | 1.0 | Pa·s | DIN 53019 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |