Stamylex® 2258

About
Stamylex 2258 is a butene based linear low density polyethylene produced in a solution polymerisation process using a Ziegler-Natta catalyst. CAS-No.: 25087-34-7 Applications Stamylex 2258 is designed for: The manufacturing of articles with extremely long flow paths and stringent warp requirements. Household applications Additives Stamylex 2258 contains thermal and processing stabilizers Special Features Stamylex 2258 is optimised to deliver: Good processing properties and toughness Dimensional stability Good resistance to an aggressive cleaning environment and high temperatures Excellent environmental stress crack resistance&&

About

Stamylex 2258 is a butene based linear low density polyethylene produced in a solution polymerisation process using a Ziegler-Natta catalyst. CAS-No.: 25087-34-7 Applications Stamylex 2258 is designed for: The manufacturing of articles with extremely long flow paths and stringent warp requirements. Household applications Additives Stamylex 2258 contains thermal and processing stabilizers Special Features Stamylex 2258 is optimised to deliver: Good processing properties and toughness Dimensional stability Good resistance to an aggressive cleaning environment and high temperatures Excellent environmental stress crack resistance&&

Product Description
Supplier	Borealis AG
Generic	LDPE
Material Status	Commercial: Active
Features	Excellent Processability,Good Dimensional Stability,Low density,Heat Stabilized,High ESCR
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.926	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	24	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	49		ISO 868
Tensile modulus	300	MPa	ISO 527-2
tensile strength
fracture	8.00	MPa	ISO 527-2/500
Tensile strain
fracture	65	%	ISO 527-2/500

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam
23℃	47	kJ/m²	ISO 180/1U

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	94.0	℃	ISO 306/A
Melting temperature	118	℃	ASTM D3418

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.