| About |
|---|
| Stanyl®是我们的高性能聚酰胺46，可应用于汽车、电子电气、齿轮、和户外动力设备。&&Stanyl®作为高性能聚酰胺，在对耐热性、设计硬度、摩擦磨耗以及流动性都有要求的严苛的应用中表现无与伦比。&&Stanyl®能在高达220°C时依旧保持良好的机械性能，这使它比PPA、PA6T、PA9T、PPS 和LCP更适合超高性能应用. |
| Product Description | |
|---|---|
| Supplier | DSM |
| Generic | PA 46 |
| Material Status | Commercial: Active |
| Features | High liquidity,Halogen free |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.49 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| TD | 0.4 / * | % | ISO 294-4 |
| Shrinkage rate | |||
| MD | 1.1 / * | % | ISO 294-4 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 11500 / 8000 | MPa | ISO 527-1-2 |
| Tensile modulus, low thickness | 12000 / – | MPa | ISO 527-1/-2 |
| Tensile modulus (test thickness) | 1 / – | mm | ISO 527-1/-2 |
| Fracture stress | 145 / 100 | MPa | ISO 527-1/-2 |
| Fracture stress (low thickness) | 160 / – | MPa | ISO 527-1/-2 |
| Fracture strain (test thickness) | 1 / – | mm | ISO 527-1/-2 |
| Tensile strain | |||
| fracture | 2.1 / 3.1 | % | ISO 527-1/2 |
| Fracture strain (low thickness) | 2.4 / – | % | ISO 527-1/-2 |
| Fracture strain (test thickness) | 1 / – | mm | ISO 527-1/-2 |
| Bending modulus | 10500 / 8000 | MPa | ISO 178 |
| bending strength | 210 / 200 | MPa | ISO 178 |
| Weld seam strength (thickness 1) | 50 / – | MPa | ISO 527-1/-2 |
| Elongation rate of weld seam (thickness 1) | 0.55 / – | % | ISO 527-1/-2 |
| Thickness testing | 1 / * | mm | ISO 527-1/-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | |||
| 10℃ / min | 295 / * | ℃ | ISO 11357-1/-3 |
| Glass transition temperature | |||
| 10℃/min | 75 / * | °C | ISO 11357-1/-2 |
| Combustibility (1.5mm thickness) | V-0 / * | class | IEC 60695-11-10 |
| Test thickness | 1.5 / * | mm | IEC 60695-11-10 |
| Combustibility at a thickness of h | V-0 / * | class | IEC 60695-11-10 |
| The thickness of the test specimen used for testing | 0.8 / * | mm | IEC 60695-11-10 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Relative permittivity | |||
| 100 Hz | 4.4 / – | IEC 60250 | |
| Relative permittivity | |||
| 1 MHz | 4.1 / – | IEC 60250 | |
| Relative permittivity | |||
| 1 GHz | 3.9 / – | IEC 60250 | |
| Relative permittivity | |||
| 10 GHz | 3.8 / – | IEC 60250 | |
| Dissipation factor | |||
| 100 Hz | 72 / – | E-4 | IEC 60250 |
| Dissipation factor | |||
| 100 Hz | 165 / – | E-4 | IEC 60250 |
| Dissipation factor | |||
| 1 GHz | 120 / – | E-4 | IEC 60250 |
| Dissipation factor | |||
| 10 GHz | 100 / – | E-4 | IEC 60250 |
| Volume resistivity | >1E15 | ohms·cm | IEC 60093 |
| Dielectric strength | 30 / – | kV/mm | IEC 60243-1 |
| Compared to the leakage tracing index | 550 / – | V | IEC 60112 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| 23℃ | 50 / 60 | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength | |||
| 23℃ | 9 / 10 | kJ/m² | ISO 179/1eA |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |