Stanyl® TE250F9

About
45% Glass Reinforced, Heat Stabilized, Flame Retardant&&

Product Description
SupplierDSM
GenericPA 46
Material StatusCommercial: Active
FeaturesFlame Characteristics,Heat Stabilized
AvailabilitysNorth America,Asia Pacific,Europe

Technical Data

Process Conditions
injectionNominal valueUnitTest method
Drying temperature80°C
Drying time4.0 to 8.0hr
Barrel rear temperature280 to 320°C
Barrel middle temperature300 to 320°C
Barrel front temperature300 to 320°C
Nozzle temperature300 to 320°C
Processing (melt) temperature305 to 320°C
Mold temperature80 to 120°C
Injection speed中等偏快 
Back pressure2.00 to 10.0MPa
Screw compression ratio2.5:1.0 

Notes
1. Typical properties: these are not to be construed as specifications.
2. 10°C/min
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.
Inquire Nowlink