Stanyl® TS256F8

About
Stanyl® TS256F8是一种聚酰胺 46（尼龙 46）材料,含有的填充物为40% 玻璃纤维增强材料。该产品在亚太地区有供货,。 Stanyl® TS256F8的主要特性有: 阻燃/额定火焰 Flame Retardant 低吸湿性&&

Product Description
Supplier	DSM
Generic	PA 46
Material Status	Commercial: Active
Features	Flame Characteristics,Low moisture absorption
Availabilitys	Asia Pacific

Technical Data

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80	°C
Drying time	4.0 to 8.0	hr
Barrel rear temperature	280 to 320	°C
Barrel middle temperature	300 to 320	°C
Barrel front temperature	300 to 320	°C
Nozzle temperature	300 to 320	°C
Processing (melt) temperature	305 to 320	°C
Mold temperature	80 to 120	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.