| About |
|---|
| Product Description | |
|---|---|
| Supplier | Xingchen |
| Generic | PPO(PPE)+PS |
| Material Status | Commercial: Active |
| Features | Halogen free,Flame Characteristics,high machine finish |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Specific Gravity | 1.08 | ISO 1183 | |
| Melt Flow Rate | |||
| 280℃，5kg | 10 | g/10min | ISO 1133 |
| Molding shrinkage | |||
| Parallel | 0.5-0.7 | % | ISO 294-4 |
| Normal | 0.5-0.7 | % | ISO 294-4 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | |||
| Broken BRK, 50 mm/min | 60 | MPa | ISO 527-2 |
| Tensile Strain | |||
| Broken BRK, 50 mm/min | 15 | % | ISO 527 |
| Flexural Strength | |||
| 2 mm/min | 100 | MPa | ISO 178 |
| Flexural Modulus | |||
| 2 mm/min | 2500 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 18 | kJ/m² | ISO 179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 1.82 MPa, unannealed | 116 | ℃ | ISO 75-1/-2 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame Class Rating | |||
| 0.8 mm | V-0 | UL 94 |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume Resistance | 1E16 | ohm·cm | IEC 60093 |
| Dielectric Strength | |||
| In oil | 18 | kV/mm | IEC 60243-1 |
| Dielectric Constant | |||
| 100 Hz | 2.9 | IEC 60250 |
| Process Conditions | |||
|---|---|---|---|
| Injection Molding | Nominal value | Unit | Test method |
| Drying Temperature | 110-120 | ℃ | |
| Drying Time | 3-4 | hr | |
| Melt Temperature | 270-310 | ℃ | |
| Nozzle temperature | 270-310 | ℃ | |
| Mold Temperature | 80-110 | ℃ | |
| Injection pressure | 70-120 | MPa | |
| Back Pressure | 0.3-0.7 | bar | |
| Screw Speed | <100 | rpm | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |