| About |
|---|
| Starpylen MH0200A is a High Density Polypropylene Injection Molding Resin&& |
| Product Description | |
|---|---|
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | High density |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.91 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| MD | 0.80 to 1.0 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 4500 | MPa | ISO 527-1-2 |
| tensile strength | |||
| fracture | 18.0 | MPa | ISO 527-2/5 |
| Tensile strain | |||
| fracture | 25 | % | ISO 527-2/5 |
| Bending modulus | 3000 | MPa | ISO 178 |
| bending strength | 33.0 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 3.0 | kJ/m² | ISO 180-1A |
| Notched impact strength of cantilever beam | |||
| 23℃ | 20 | kJ/m² | ISO 180/1U |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed, 64 mm span | 64.0 | ℃ | ISO 75-2/Af |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 70.0 | °C | |
| Drying time | 3.0 | hr | |
| Barrel rear temperature | 195 to 205 | °C | |
| Barrel middle temperature | 215 to 225 | °C | |
| Barrel front temperature | 225 to 250 | °C | |
| Processing (melt) temperature | 225 to 250 | °C | |
| Mold temperature | 30.0 to 50.0 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Tensile Bar |
| 3. 0.079 in/min |
| 4. Break |
| 5. 80*10*4 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |