| About |
|---|
| Stat-Rite® S250 is a static dissipative polypropylene alloy. Stat-Rite® S250 utilizes the patented Stat-Rite® inherently dissipative polymer (IDP) alloy system to provide clean, permanent ESD protection. Stat-Rite® IDP alloys provide consistent static dissipation even when extruded, injection molded or thermoformed into components.&& |
| Product Description | |
|---|---|
| Supplier | Lubrizol Advanced Materials |
| Generic | PP Alloy |
| Material Status | Commercial: Active |
| Features | High purity,Low (to None) Ion Content,Electrostatic discharge protection,Low odor,Moisture resistance,Durability,Antistatic property,Good coloring |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Process Methods | Thermo forming |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.980 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 23 ℃ | 28.0 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃ | 200 | % | ASTM D638 |
| Tensile modulus | |||
| 23℃ | 1280 | MPa | ASTM D638 |
| Bending modulus | |||
| 23℃ | 1280 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 73.0 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 50.0 | ℃ | ASTM D648 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volumetric resistance | 3.0E+10 | Ω.cm | ASTM D257 |
| Surface resistance | 8.0E+9 | Ω.cm | ASTM D257 |
| Electrostatic attenuation | <1.0 | sec | |
| Surface resistance | 8.0E+8 | ohms | ESD S11.11 |
| Frictional charge | 10.0 | V | Internal Method |
| Other performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Ion content | 7.00 | ng/cm² | Internal Method |
| Ion content | 5.00 | ng/cm² | Internal Method |
| Ion content | 16.0 | ng/cm² | Internal Method |
| Ion content | 53.00 | ng/cm² | Internal Method |
| Gas precipitation | 1.00 | µg/g | Internal Method |
| Gas precipitation | <0.100 | µg/g | Internal Method |
| Gas precipitation | <0.100 | µg/g | Internal Method |
| Gas precipitation | 7.00 | µg/g | Internal Method |
| Ion content | <10.0 | ng/cm² | Internal Method |
| nonvolatile content | 1.30 | µg/cm² | Internal Method |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 110 | J/m | ASTM D256 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 12% RH |
| 3. 50% RH |
| 4. CPM, 50% RH |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |