Stat-Tech™ NN-20CF/000 Black WEB

About
Stat-Tech™ Electrically Conductive Compounds are specifically engineered to provide anti-static, ESD and RFI/EMI shielding performance for critical electronic equipment applications. These compounds combine the performance of select engineering resins with reinforcing additives such as carbon powder, carbon fiber, nickel-coated carbon fiber and stainless steel fiber for low to high levels of conductivity depending upon application requirements.&&

About

Stat-Tech™ Electrically Conductive Compounds are specifically engineered to provide anti-static, ESD and RFI/EMI shielding performance for critical electronic equipment applications. These compounds combine the performance of select engineering resins with reinforcing additives such as carbon powder, carbon fiber, nickel-coated carbon fiber and stainless steel fiber for low to high levels of conductivity depending upon application requirements.&&

Product Description
Supplier	Polyone
Generic	PA66
Material Status	Commercial: Active
Features	Good Rigidity,High Heat Resistance,Hypocrystalline,Solvent resistance
Availabilitys	Africa & Middle East ,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.22	g/cm³	ISO 1183
Melt Flow Rate
275℃，2.16kg	21	g/10min	ISO 1133
Melt Volume Rate
275℃，2.16 kg	20.4	cm³/10min	ISO 1133
Shrinkage rate
TD	0.40 to 0.50	%
MD	0.10 to 0.20	%

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	14000	MPa	ISO 527-2
tensile strength
fracture	200	MPa	ISO 527-2
Tensile strain
fracture	2.0 to 2.6	%	ISO 527-2
Bending modulus	11700	MPa	ISO 178
bending strength	265	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	5.0	kJ/m²	ISO 179
Charpy Unnotch Impact strength	45	kJ/m²	ISO 179

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+2 to 1.0E+3	ohms	IEC 60093
Volume resistivity	1.0E+2 to 1.0E+3	ohms·cm	IEC 60093

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	288 to 304	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.