| About |
|---|
| STATEX® 10 is a Polypropylene material. It is available in Asia Pacific or North America. Important attributes of STATEX® 10 are: Flame Rated REACH Compliant RoHS Compliant Flame Retardant Antistatic&& |
| Product Description | |
|---|---|
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Flame Characteristics,Antistatic property,Low moisture absorption,Insulation,VTM-0 |
| Availabilitys | North America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.988 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| saturated | 0.010 | % | ASTM D570 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 220 to 330 | µm | |
| tensile strength | ASTM D882 | ||
| MD, yield | 33.1 | MPa | ASTM D882 |
| TD, yield | 24.8 | MPa | ASTM D882 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 106 | ℃ | ASTM D648 |
| Relative temperature index | 95.0 | ℃ | UL 746 |
| Electrical performance | 95.0 | ℃ | UL 746 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 1.0E+10 to 1.0E+12 | ohms | ASTM D257 |
| Volume resistivity | 1.5E+17 | ohms·cm | ASTM D257 |
| Dielectric strength | 69 | kV/mm | ASTM D149 |
| Dielectric constant | 2.30 | ASTM D150 | |
| Dissipation factor | 9.0E-4 | ASTM D150 | |
| Compared to the leakage tracing index | 600 | V | ASTM D3638 |
| High Arc Burning Index (HAI) | 113 | UL 746 | |
| High voltage arc marking rate | |||
| HVTR | 0.00 | mm/min | UL 746 |
| Hot wire ignition | |||
| HWI | 6.0 | sec | UL 746 |
| breakdown voltage | 17500 | V | ASTM D149 |
| Electrostatic attenuation | < 2.0 | sec | ASTM D257 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | VTM-0 | UL 94 | |
| Extreme oxygen index | 28 | % | ASTM D2863 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |