| About |
|---|
| UPM-424 is for manufacturing of sheets, inside details for refrigerators (except chambers with operating mode below minus 18°C and with polyurethane foam heat insulation.&& |
| Product Description | |
|---|---|
| Supplier | JSC CONCERN STIROL |
| Generic | PS (HIPS) |
| Material Status | Commercial: Active |
| Features | High impact resistance,Heat Stabilized |
| Availabilitys | Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | 3.0 to 4.5 | g/10min | ISO 1133 |
| Water absorption rate | |||
| Equilibrium, 23 ℃, 50% RH | < 0.10 | % | ISO 62 |
| Combined with styrene | < 0.1 | % | |
| Rubber Content | 20.0 | ||
| purity | 20.0 | ||
| Ash Content | > 1.1 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strain | |||
| fracture | > 40 | % | ISO 527-2 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | > 8.0 | kJ/m² | ISO 179 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |