| About |
|---|
| High Temperature material (RGD525) has exceptional dimensional stability for thermal function testing of 3D models. The material has a heat deflection temperature (HDT) of 63-67 °C (145-153 °F) upon removal from the printer which can be increased to 75-80 °C (167-176 °F) after thermal post-treatment in a programmable oven. Ideal for: Form, fit and thermal functional testing High-definition models requiring excellent surface quality Exhibition models that endure strong lighting conditions Post-processing including painting, gluing, or metallization processes Taps, pipes and household appliances Hot air and hot water testing&& |
| Product Description | |
|---|---|
| Generic | 3D打印材料 |
| Material Status | Commercial: Active |
| Features | Good surface appearance,Good Dimensional Stability,High Heat Resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.17 to 1.18 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| 24hr | 1.2 to 1.4 | % | ASTM D570 |
| Ash Content | 0.38 to 0.42 | % | USP 281 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 14 to 16 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed | 63.0 to 67.0 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed | 75.0 to 80.0 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 55.0 to 57.0 | ℃ | ASTM D648 |
| Glass transition temperature | 62.0 to 65.0 | ℃ | DMA |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 87 to 88 | ||
| Rockwell hardness | |||
| M-level | 78 to 83 | ||
| Tensile modulus | 3200 to 3500 | MPa | ASTM D638 |
| tensile strength | 70.0 to 80.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 10 to 15 | % | ASTM D638 |
| Bending modulus | 3100 to 3500 | MPa | ASTM D790 |
| bending strength | 110 to 130 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. After thermal post treatment procedure A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |