Strator® C-5 - SOLIAO

About
Strator® C-5 is a Polyamide 66 Alloy (Nylon 66 Alloy) material filled with 50% long glass fiber. It is available in Europe. Primary attribute of Strator® C-5: High Strength.&&

Product Description
Supplier	Solvay
Generic	PA66 Alloy
Material Status	Commercial: Active
Features	Good Rigidity
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.60	g/cm³
Shrinkage rate
MD	0.10	%
Water absorption rate
Equilibrium, 23 ℃, 50% RH	1.5	%

MECHANICAL	Nominal value	Unit
Tensile modulus
23℃	17500	MPa
90℃	10500	MPa
120℃	9500	MPa
tensile strength
Fracture, 23 ℃	265	MPa
Fracture, 90 ℃	160	MPa
Fracture, 120 ℃	140	MPa
Tensile strain
fracture	2.2	%
Bending modulus
23℃	15500	MPa
bending strength
23℃	400	MPa

IMPACT	Nominal value	Unit
Charpy Notched Impact Strength
23℃	38	kJ/m²
Charpy Unnotch Impact strength
23℃	100	kJ/m²

THERMAL	Nominal value	Unit
Hot deformation temperature
0.45 MPa, unannealed	245	℃
1.8 MPa, unannealed	237	℃
Linear coefficient of thermal expansion
MD	2.0E-5	1/℃
Thermal conductivity coefficient	0.33	W/m/K

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+12	ohms

Supplementary information	Nominal value	Unit	Test method

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80 to 100	°C
Drying time	4.0	hr
Recommended maximum moisture content	0.10	%
Barrel rear temperature	270 to 300	°C
Barrel middle temperature	270 to 300	°C
Barrel front temperature	285 to 310	°C
Nozzle temperature	285 to 320	°C
Processing (melt) temperature	< 310	°C
Mold temperature	80 to 160	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.