| About |
|---|
| Stypol®AIP抗冲击聚苯乙烯低收缩添加剂用于各种FRP制造工艺，但最常用于生产块状模塑料（BMC），片状模塑料（SMC）或压模成型的湿模塑浆料。 |
| Product Description | |
|---|---|
| Supplier | Chang Chun |
| Generic | PS添加剂 |
| Material Status | Commercial: Active |
| Features | Good flexibility,Good surface appearance |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| Polymer performance | Nominal value | Unit | Test method |
| Non volatile substances | |||
| Viscosity grade S | 32 | % | |
| Viscosity grade Y | 40 | % | |
| Solid level | |||
| Viscosity grade S | 32 | ||
| Viscosity grade Y | 40 | ||
| viscosity | |||
| Viscosity grade S | 2.8 | Pa·s | |
| Viscosity grade Y | 10 | Pa·s | |
| acidity | 0 | ||
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 26.9 | MPa | ASTM D638 |
| Tensile modulus | 12617 | MPa | ASTM D638 |
| Tensile strain | 0.26 | % | ASTM D638 |
| bending strength | 89.6 | MPa | ASTM D790 |
| Bending modulus | 13789 | MPa | ASTM D790 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shrinkage rate | 0.01 | FCTM 3010 |
| Process Conditions | |||
|---|---|---|---|
| injection molding | Nominal value | Unit | Test method |
| Moisture content (maximum) | 0.2 | % | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |