Styropek® BF 395

About
Styropek® BF products can be used in a wide variety of applications including blocks for construction, panels, thermal and acoustical insulation, and general packaging. Additional applications include ICF’s (“insulated concrete forms”), thin walled custom molding, lost foam and other general protective packaging. Modified expandable polystyrene (EPS) / non-flammable / antiflame / auto-extinguishable that containing approximately 5.5 to 6.4 wt% pentane as blowing agent. All products are supplied as spherical beads with a bulk density of approximately 40 lb/ft³ (640 kg/m³). Styropek® BF products are compatible with many anti-stat, mineral oil, color additives and other additives added during processing. Styropek® BF products do not contain chlorofluorocarbons and hydrofluorocarbons compounds. Intended uses Block molding applications, mid-range and high densities, thickness of wall >8 mm, with excellent fusion and surface appearance. Shape molding applications for machines without vacuum system and excellent cycle time.&&

About

Styropek® BF products can be used in a wide variety of applications including blocks for construction, panels, thermal and acoustical insulation, and general packaging. Additional applications include ICF’s (“insulated concrete forms”), thin walled custom molding, lost foam and other general protective packaging. Modified expandable polystyrene (EPS) / non-flammable / antiflame / auto-extinguishable that containing approximately 5.5 to 6.4 wt% pentane as blowing agent. All products are supplied as spherical beads with a bulk density of approximately 40 lb/ft³ (640 kg/m³). Styropek® BF products are compatible with many anti-stat, mineral oil, color additives and other additives added during processing. Styropek® BF products do not contain chlorofluorocarbons and hydrofluorocarbons compounds. Intended uses Block molding applications, mid-range and high densities, thickness of wall >8 mm, with excellent fusion and surface appearance. Shape molding applications for machines without vacuum system and excellent cycle time.&&

Product Description
Generic	PS (EPS)
Material Status	Commercial: Active
Features	Renewable resources,Foaming performance,Flame Characteristics,Self-extinguishing
Availabilitys	North America,Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Apparent density	0.64	g/cm³

Supplementary information	Nominal value	Unit
Bead diameter
600.0 to 1180.0 µ m	> 97	%
Expanded Density	14.0 to 24.0	kg/m³
Monomer Residue	< 1000	ppm

Notes
1. Pentane
2. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.