Styropor® BFL 295

About
Products and their uses Styropor BFL 295 low pentane product can be used in a wide variety of applications including blocks for panels, general insulation, below grade use, fabrication, and flotation with high and low densities requiring excellent fusion with or without regrind. Description Modified expandable polystyrene (EPS) containing approximately 3.45 – 3.65 wt % pentane as the blowing agent. The BFL 295 is supplied as spherical beads with a bulk density of approximately 40 lbs/ft³ (640 kg/m³).&&

Product Description
SupplierBASF
GenericPS (EPS)
Material StatusCommercial: Active
FeaturesHF-1
AvailabilitysNorth America

Technical Data
PHYSICALNominal valueUnitTest method
Density0.0144 to 0.112g/cm³
Apparent density0.64g/cm³

FLAME CHARACTERISTICSNominal valueUnitTest method
Flame retardant levelHF-1 UL 94

Supplementary informationNominal valueUnitTest method
Bead diameter0.850 to 1.70mm
Material NumberI, VIII, II, IX 
Pre(Puff Age dependent on density)0.2 to 3.0day

Notes
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.