| About |
|---|
| Application For the production of expanded foam moldings having a wall thickness of at least 8 mm. Product description Expandable polystyrene (EPS) (blowing agent: pentane).&& |
| Product Description | |
|---|---|
| Supplier | BASF |
| Generic | PS (EPS) |
| Material Status | Commercial: Active |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.02 | g/cm³ | |
| Particle size distribution | |||
| < 500.0 µm | < 2.0 | % | |
| 500.0 to 1000.0 µ m | > 93 | % | |
| > 1.00 mm | < 5.0 | % | |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Aging（intermediate） | 10.0 to 24.0 | hr | |
| Bead diameter | 700.0 to 900.0 | µm |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |