SUMIKATHENE® L211

About
SUMIKATHENE® L211 is a Low Density Polyethylene material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion. Primary attribute of SUMIKATHENE® L211: Heat Resistant. Typical applications include: Coating Applications Packaging&&

Product Description
Supplier	Sumitomo
Generic	LDPE
Material Status	Commercial: Active
Features	Thermal viscous strength,Heat Resistance, Good
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.924	g/cm³	JIS K6922-1
Melt Flow Rate	2.0	g/10min	JIS K6922-1
ESCR(Environmental Stress Cracking Resistance)	1.60	hr	ASTM D1693

IMPACT	Nominal value	Unit	Test method
Tensile impact strength	200	kJ/m²	ASTM D1822

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	98.0	℃	JIS K7206
Melting temperature	112	℃	DSC

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	56		JIS K7215
tensile strength
fracture	17.0	MPa	Internal Method
Tensile strain
fracture	550	%	Internal Method
Bending modulus
23℃	245	MPa	ASTM D747

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.