Sumikon® PM-9820

About
SUMIKON® PM-9820 (Type JR Black) is Organic fiber and Inorganic filler filled resol resin (non-anmonia phenolic) molding compound with good electronic property and heat resistance. This grade is official registered UL with V-0 (t=0.16).&&

Product Description
Supplier	SBHPP
Generic	酚醛树脂
Material Status	Commercial: Active
Features	Good Electrical Properties,Heat Resistance, Good,V-0
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.46	g/cm³	JIS K6911
Shrinkage rate
MD	0.76	%	JIS K6911
Water absorption rate
balance	0.28	%	JIS K6911

MECHANICAL	Nominal value	Unit	Test method
tensile strength	75.0	MPa	JIS K6911
Bending modulus	7000	MPa	JIS K6911
bending strength	110	MPa	JIS K6911
compressive strength	231	MPa	JIS K6911

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	3.5	kJ/m²	JIS K6911

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	215	℃	JIS K6911

Electrical performance	Nominal value	Unit	Test method
Dielectric strength	10	kV/mm	JIS K6911
Arc resistance	130	sec	JIS K6911
Compared to the leakage tracing index	175	V	IEC 60112
insulation resistance			JIS K6911
—	1.0E+11	ohms	JIS K6911
—	1.0E+10	ohms	JIS K6911

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
0.160 mm	V-0		UL 94

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.