About |
---|
SUMILITERESIN® PR-G-350 I is a liquid resol phenolic resin water base. Characteristics For Coated Abrasive : good processability, optimize oven process and good coating surface. It’s improve heat resistance, strength and abrasive properties. For fiber impregnation : good processability, compatible with fiber cloth and polyester in impregnation process. It can be diluted with organic solvent such as methanol, ethanol, Aceton etc.&& |
Product Description | |
---|---|
Supplier | SBHPP |
Generic | 酚醛树脂 |
Material Status | Commercial: Active |
Features | Excellent Processability |
Availabilitys | Asia Pacific |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
PH value | |||
25℃ | 6.8 to 8.8 |
Supplementary information | Nominal value | Unit | Test method |
---|---|---|---|
Resin content | |||
135℃ | 73 to 79 | % | |
Water Tolerance(25℃) | > 50 | % |
Uncured Properties | Nominal value | Unit | Test method |
---|---|---|---|
Density | |||
25℃ | 1.26 to 1.27 | g/cm³ | |
viscosity | |||
25℃ | 1.0 to 1.8 | Pa·s | |
Gelation time | |||
150℃ | 1.0 to 1.7 | min |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |