| About |
|---|
| Applications: For print and lamination, adhesive tape, food packaging, cigarette packaging, etc. Characteristics: Medium flow BOPP with excellent clarity, gloss and stiffness. Excellent processability and suitable for metallization.&& |
| Product Description | |
|---|---|
| Supplier | Sumitomo |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Good Clarity,Good surface appearance,Renewable resources,Moderate liquidity,Electroplating,Homopolymer |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ASTM D792-A |
| Melt Flow Rate | |||
| 230℃，2.16kg | 3.0 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 20 | µm | |
| Secant modulus | |||
| 1% secant, MD | 2100 | MPa | |
| 1% secant, TD | 3850 | MPa | |
| tensile strength | |||
| MD, fracture | 100 | MPa | |
| TD, fracture | 215 | MPa | |
| Tensile strain | |||
| MD, fracture | 85 | % | |
| TD, fracture | 15 | % |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 2.8 | kJ/m² | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 153 | ℃ | ASTM D1525 2 |
| Melting temperature | 158 | ℃ | DSC |
| Crystallization peak temperature | |||
| DSC | 114 | ℃ | DSC |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45° | 155 | ASTM D2457 | |
| Haze | 0.10 | % | ASTM D1003 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Stretching Ratio | |||
| MD | 4.00 to 7.00 | ||
| TD | 7.00 to 10.0 | ||
| 130 to 160 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | 98 | ASTM D785 | |
| Bending modulus | 1270 | MPa | ASTM D790 |
| bending strength | 35.0 | MPa | ASTM D790 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 190 to 250 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |