Sungbo HI-LENE F-850P-1

About
Sungbo’s HI-LENE F-850P-1 is a product manufactured from an automated extruder. This allows for a smooth surface and excellent permeability when extruded as well as exceptional whiteness, making it easy to use for products that require whiteness. Moreover, pollutants are minimized when incinerated or covered by landfill, and the speed of light decomposition of this environmentally friendly product can be adjusted with the mixing ratio. It boasts exceptional printability, coolability and shock resistance, all of which increases production and reduces costs.&&

About

Sungbo’s HI-LENE F-850P-1 is a product manufactured from an automated extruder. This allows for a smooth surface and excellent permeability when extruded as well as exceptional whiteness, making it easy to use for products that require whiteness. Moreover, pollutants are minimized when incinerated or covered by landfill, and the speed of light decomposition of this environmentally friendly product can be adjusted with the mixing ratio. It boasts exceptional printability, coolability and shock resistance, all of which increases production and reduces costs.&&

Product Description
Generic	热塑性聚酯
Material Status	Commercial: Active
Features	noise reduction,Good Printability
Availabilitys	Asia Pacific
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.09	g/cm³	ASTM D792
Melt Flow Rate	38	g/10min	ASTM D1238
Moisture content	460	ppm	ASTM D570
PH value	9.0

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.