| About |
|---|
| Sungbo’s HI-LENE SBPS is a product manufactured from an automated extruder that is a thermoplastic synthetic resin that was copolymerized in macromolecule state. HI-LENE SBPS has excellent mechanical properties, is easy to mold process, has exceptional electrical characteristics, and depending on the characteristic, is used for products that involve complicated processing. The representative products in which HI-LENE SBPS is used include medicine, food containers, vegetable boxes, stationery. various toys, etc.&& |
| Product Description | |
|---|---|
| Generic | 热塑性聚酯 |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Electrical Properties,Copolymer |
| Availabilitys | Asia Pacific |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.32 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 15 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD：0.0500 mm | 0.30 to 0.60 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 23 ℃ | 42.1 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 2.0 | % | ASTM D638 |
| bending strength | |||
| 23℃ | 60.1 | MPa | ASTM D790 |
| Bending stiffness | |||
| 23℃ | 2.84 | GPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |