Sup-tech CS103

About
Sup-tech CS103 is a Polycarbonate + ABS (PC+ABS) product. It can be processed by injection molding and is available in Asia Pacific.&&

Product Description
Supplier	Suptech
Generic	PC+ABS
Material Status	Commercial: Negative
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.15	g/cm³	DIN 53479
Shrinkage rate	5.0E-3 to 7.0E-3	%	DIN 53464
Water absorption rate			DIN 53495
23℃，24hr	0.10	%	DIN 53495
Saturation, 23 ℃	0.20	%	DIN 53495

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	45	kJ/m²	DIN 53453

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	110	℃	DIN 53461

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+14	ohms	IEC 60093
Dielectric strength	17	kV/mm	DIN 53481

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	116		ISO 2039-2
tensile strength
fracture	50.0	MPa	DIN 53455
Tensile strain
fracture	20	%	DIN 53452
Bending modulus	2000	MPa	DIN 53457
bending strength	75.0	MPa	DIN 53457

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	100	°C
Drying time	7.0 to 18	hr
Processing (melt) temperature	230 to 260	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.