Sup-tech P240 - SOLIAO

About
Sup-tech P240 is a Polypropylene product filled with 30% mineral. It can be processed by injection molding and is available in Asia Pacific.&&

Product Description
Supplier	Suptech
Generic	PP not specified
Material Status	Commercial: Negative
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.04	g/cm³	DIN 53479
Melt Flow Rate	2.0 to 8.0	g/10min	DIN 53735
Shrinkage rate	0.014	%	DIN 53464
Water absorption rate
23℃，24hr	0.030	%	DIN 53495

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	4.0	kJ/m²	DIN 53453

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			DIN 53461
0.45 MPa, unannealed	125	℃	DIN 53461
1.8 MPa, unannealed	90.0	℃	DIN 53461
Melting temperature	165	℃

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+14	ohms	IEC 60093
Dielectric strength	19	kV/mm	DIN 53481

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	85		ISO 2039-2
tensile strength
fracture	34.0	MPa	DIN 53455
Tensile strain
fracture	10	%	DIN 53452
Bending modulus	2500	MPa	DIN 53457
bending strength	45.0	MPa	DIN 53457

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80	°C
Drying time	4.0 to 6.0	hr
Processing (melt) temperature	185 to 240	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.