SUPRAN® LFT PP 2320

About
20% long glass fiber reinforced extrisopm & gas injection purpose Polypropylene.&&

Product Description
Generic	PP not specified
Material Status	Commercial: Active
Features	HB
Availabilitys	Asia Pacific
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.03	g/cm³	ASTM D792
Shrinkage rate
MD	0.50	%	ASTM D648
Water absorption rate
24hr	0.020	%	ASTM D570

MECHANICAL	Nominal value	Unit	Test method
tensile strength	67.7	MPa	ASTM D638
Tensile strain
fracture	4.0	%	ASTM D638
Bending modulus	3580	MPa	ASTM D790
bending strength	89.2	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-30℃	260	J/m	ASTM D256
23℃	250	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	150	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	HB		UL 94

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	90	°C
Drying time	2.0	hr
Processing (melt) temperature	210 to 220	°C
Mold temperature	40 to 70	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.