SUPRAN® PP1320

About
SUPRAN® is injection-moldable Long Fiber Reinforced Thermoplastics(LFT), PP1320 is Polypropylene reinforced with 20wt% long glass fibers. Parts molded of SUPRAN® have outstanding mechanical properties such as high strength, stiffness, impact and creep resistance and low warpage combined with high heat deflection. SUPRAN® PP1320 is suitable for structural parts in automotive and industrial application.&&

About

SUPRAN® is injection-moldable Long Fiber Reinforced Thermoplastics(LFT), PP1320 is Polypropylene reinforced with 20wt% long glass fibers. Parts molded of SUPRAN® have outstanding mechanical properties such as high strength, stiffness, impact and creep resistance and low warpage combined with high heat deflection. SUPRAN® PP1320 is suitable for structural parts in automotive and industrial application.&&

Product Description
Generic	PP not specified
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,Good flexibility,High impact resistance
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.03	g/cm³	ASTM D792
Shrinkage rate
MD	0.45	%	ASTM D995

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, annealed	159	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Test method
Flame retardant level
1.50mm	HB	UL-94
3.00mm	HB	UL-94

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam
23℃	155	J/m	ASTM D256
-30℃	165	J/m	ASTM D256

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness	108	R 级	ASTM D785
tensile strength
23℃	98	MPa	ASTM D638
Tensile strain
Fracture, 23 ℃	3	%	ASTM D638
bending strength
23℃	128	MPa	ASTM D790
Bending modulus
23℃	4940	MPa	ASTM D790

Process Conditions
injection	Nominal value	Unit	Test method
Injection temperature
Rear barrel temperature	205-215	°C
Central temperature of the barrel	215-225	°C
Barrel front temperature	225-230	°C
Mold temperature	40-70	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.