SUPRAN® PP1330

About
SUPRAN® is injection-moldable Long Fiber Reinforced Thermoplastics(LFT), PP1330 is Polypropylene reinforced with 30wt% long glass fibers. Parts molded of SUPRAN ® have outstanding mechanical properties such as high strength, stiffness, impact and creep resistance and low warpage combined with high heat deflection. SUPRAN ® PP1330 is suitable for structural parts in automotive and industrial application.&&

About

SUPRAN® is injection-moldable Long Fiber Reinforced Thermoplastics(LFT), PP1330 is Polypropylene reinforced with 30wt% long glass fibers. Parts molded of SUPRAN ® have outstanding mechanical properties such as high strength, stiffness, impact and creep resistance and low warpage combined with high heat deflection. SUPRAN ® PP1330 is suitable for structural parts in automotive and industrial application.&&

Product Description
Generic	PP not specified
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,Good flexibility,High impact resistance
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.11	g/cm³	ASTM D792
Shrinkage rate
MD	0.40	%	ASTM D955

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-30℃	210	J/m	ASTM D256
23℃	200	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	161	℃	ASTM D648

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	108		ASTM D785
tensile strength	113	MPa	ASTM D638
Tensile strain
fracture	2.7	%	ASTM D638
Bending modulus	6570	MPa	ASTM D790
bending strength	157	MPa	ASTM D790

Process Conditions
injection	Nominal value	Unit	Test method
Barrel rear temperature	220 to 230	°C
Barrel middle temperature	220 to 230	°C
Barrel front temperature	220 to 230	°C
Mold temperature	40 to 70	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.