| About |
|---|
| SUPREME HIPS SH 731E是一种高抗冲聚苯乙烯产品,。 它可以通过挤出、注射成型或热成型进行加工,在亚太地区、北美洲、欧洲或非洲和中东有供货。 SUPREME HIPS SH 731E的应用领域包括容器、包装、医疗/保健、厨房用具 和 电气/电子应用。 特性包括: 可接触食品 耐冲击 高光泽度&& |
| Product Description | |
|---|---|
| Generic | PS (HIPS) |
| Material Status | Commercial: Active |
| Features | Good surface appearance,High impact resistance,Food contact compliance,Moderate liquidity |
| Availabilitys | Africa & Middle East ,North America,Asia Pacific,Europe |
| Process Methods | Thermo forming |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.05 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 4.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 24.5 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 50 | % | ASTM D638 |
| Bending modulus | |||
| 3.20 mm | 2060 | MPa | ASTM D790 |
| bending strength | |||
| Yield, 3.20 mm | 41.7 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 3.2mm | 120 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 83.0 | ℃ | ASTM D648 |
| Vicat Softening Temp | 100 | ℃ | ASTM D1525 3 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |