| About |
|---|
| SUPRENE EPDM 512F has high ethylene content for high green strength of uncured rubber. Since SUPRENE EPDM 512F can make a formulation incorporating large quantities of fillers and process oil, the resulting compound is inexpensive. In addition, its ‘friable bale’ form facilitates its mixing with ingredients by means of a Banbury mixer and at shorter mixing time, which results in energy saving. For examples of application of SUPRENE EPDM 512F making the best use of its above- mentioned characteristics, there are various extrusion products, such as hose, window gasket, various molded products, and low cost compounds.&& |
| Product Description | |
|---|---|
| Supplier | SKC |
| Generic | EPDM+SEBS |
| Material Status | Commercial: Active |
| Features | Good Rigidity |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.860 | g/cm³ | ASTM D792 |
| Mooney viscosity | |||
| ML 1+4，125℃ | 63 | MU | ASTM D1646 |
| Ethylene composition | 71.0 | wt% | ASTM D3900 |
| Ethylidene norbornene content | 4.5 | wt% | ASTM D6047 |
| Ash Content | 0.01 | % | ASTM D5667 |
| Volatiles | 0.20 | wt% | ASTM D5668 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |