| About |
|---|
| SUPRENE EPDM 537-3 is used by blending with IIR. SUPRENE EPDM 537-3 shows excellent heat aging properties, especially with peroxide cures. It blends easily in all formulation and gives excellent weathering and low temperature impact properties. SUPRENE EPDM 537-3 is mainly used in blends with IIR for inner tubes. It can also be used in various applications such as mechanical goods.&& |
| Product Description | |
|---|---|
| Supplier | SKC |
| Generic | EPDM+SEBS |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good heat aging resistance,low-temperature impact resistance,Terpolymer |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.860 | g/cm³ | ASTM D792 |
| Mooney viscosity | |||
| ML 1+4，125℃ | 35 | MU | ASTM D1646 |
| Ethylene composition | 57.0 | wt% | ASTM D3900 |
| Ethylidene norbornene content | 2.3 | wt% | ASTM D6047 |
| Ash Content | < 0.2 | % | ASTM D5667 |
| Volatiles | < 0.80 | wt% | ASTM D5668 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |