| About |
|---|
| SUPRENE EPDM 600WF is an oil-extended ‘friable bale’ ENB type grade which contains 100phr of non-staining paraffinic oil. SUPRENE EPDM 600WF is possible to load it with high concentration of fillers etc. When blended with a non-oil extended SUPRENE EPDM grade, the SUPRENE EPDM 600WF improves the properties and processability (at mixing and extruding) of the non-oil extended grade. It can be formulated to make products of lower hardness. Its blend with diene-type rubber gives excellent physical properties. SUPRENE EPDM 600WF is mainly used in automotive parts such as window seal, hose, and various industrial parts.&& |
| Product Description | |
|---|---|
| Supplier | SKC |
| Generic | EPDM+SEBS |
| Material Status | Commercial: Active |
| Features | Oil charge,Terpolymer |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.880 | g/cm³ | ASTM D792 |
| Mooney viscosity | |||
| ML 1+4，125℃ | 61 | MU | ASTM D1646 |
| Ethylene composition | 72.0 | wt% | ASTM D3900 |
| Ethylidene norbornene content | 4.0 | wt% | ASTM D6047 |
| oil content | 100 | phr | |
| Ash Content | < 0.2 | % | ASTM D5667 |
| Volatiles | < 0.80 | wt% | ASTM D5668 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. non-staining paraffinic oil |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |