| About |
|---|
| HD53-3000 is a Hexene copolymer certified prime grade designed for injection molding General Purpose thin-wall applications requiring good balance of properties. HD53-3000 features high flow, fast cycling, easy processability, good impact strength and dimensional stability. HD53-3000 recommended processing temperature is 210 to 230°C. with mold @ 20 to 40°C. HD53-3000 complies with FDA regulation 21CFR 177.1520(c) 3.1a + 3.2a and with most international regulations concerning the use of Polyethylene in contact with food articles.&& |
| Product Description | |
|---|---|
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,High impact resistance,Good Dimensional Stability,High liquidity,Quick molding cycle,Food contact compliance,Copolymer,High density,Hexene copolymers |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.952 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 30 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | < 10.0 | hr | ASTM D1693B |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 23.4 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 200 | % | ASTM D638 |
| Bending modulus | 1000 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 73.0 | ℃ | ASTM D648 |
| Embrittlement temperature | < -50.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 120 | ℃ | ASTM D1525 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 210 to 230 | °C | |
| Mold temperature | 20 to 40 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Notched Bent Strip |
| 3. 2.0 in/min |
| 4. 0.051 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |