| About |
|---|
| IP-200NA is an Impact injection molding copolymer certified prime resin designed for applications requiring excellent balance of stiffness and impact resistance. IP-200NA offers very good dimensional stability and impact resistance at low temperatures, improved processability, high flow rate and fast cycling. IP-200NA complies with FDA regulation 21CFR 177.1520 (a)(3)(i) / (c)3.1 + 3.2, and most international regulations concerning the use of Polypropylene in contact with food.&& |
| Product Description | |
|---|---|
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Good Rigidity,High impact resistance,Good Dimensional Stability,High liquidity,Quick molding cycle,Food contact compliance,low-temperature impact resistance,Impact copolymer |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 20 | g/10min | ASTM D1238 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 160 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed, injection molded | 88.0 | ℃ | ASTM D648 |
| Vicat Softening Temp | 132 | ℃ | ASTM D1525 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 81 | ASTM D785 | |
| tensile strength | |||
| yield | 21.9 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 7.0 | % | ASTM D638 |
| Bending modulus | |||
| 1% cut, injection molding | 1080 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 3. 0.051 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |