Sylvin 83001-50 Red 6238

About
Sylvin 83001-50 Red 6238 Is A Reach Compliant Vinyl Compound Formulated For Profile Extrusion Applications That Require Good Heat Stability And Improved Output.&&

Product Description
Supplier	Sylvin
Generic	PVC, not specified
Material Status	Commercial: Active
Availabilitys	North America
Process Methods	Profile extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.16	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
Shore hardness			ASTM D2240
Shaw’s A	50		ASTM D2240
Shore A, 10 seconds	50		ASTM D2240
tensile strength
fracture	8.27	MPa	ASTM D638
Tensile strain
fracture	430	%	ASTM D638

elastic body	Nominal value	Unit	Test method
tear strength	28.0	kN/m	ASTM D624

THERMAL	Nominal value	Unit	Test method
Melting temperature	154 to 166	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.