| About |
|---|
| Syncure™ systems are two part moisture crosslinkable compounds. S100FH-UV is a UL bulletinized, RoHS compliant and flame retardant cable insulation compound. S100FH-UV is suitable for UL 4703 photovoltaic wire insulation not requiring an outer jacket. Graft resin component of this system has approximate shelf life of 6 months from the date of production. Please consult PolyOne for its use past 6 months.&& |
| Product Description | |
|---|---|
| Supplier | Polyone |
| Generic | XLPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Antifreeze,Flame Characteristics,Grease resistance |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.03 | g/cm³ | ASTM D792 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strength retention rate | |||
| 136℃，762.0 µm | 99 | % | |
| Elongation retention rate | |||
| 136℃，762.0 µm | 98 | % |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| UL temperature rating | 90 | ℃ |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | 43 | kV/mm | ASTM D149 |
| Dielectric constant | |||
| 1 MHz | 2.30 | ASTM D150 | |
| Dissipation factor | |||
| 1 MHz | 4.3E-3 | ASTM D150 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame test | |||
| level | 通过 | UL 1581 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Catalyst parent mixture | |||
| V0022GUV RoHS | 17 | % | |
| Transplant resin | |||
| S1054A | 83 | % | |
| memo_intro |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shaw’s D | 51 | ||
| Shore D, 10 seconds | 45 | ||
| tensile strength | |||
| yield | 12.1 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 400 | % | ASTM D638 |
| Load deformation | |||
| 131℃ | 7.60 | % | ASTM D621 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type IV, 20 in/min |
| 3. 2000 g, 1 hr. |
| 4. 168 hr, UL Standard |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |