| About |
|---|
| Available as Flame Retardant Catalyst Masterbatch component for PolyOne Syncure System.&& |
| Product Description | |
|---|---|
| Supplier | Polyone |
| Generic | XLPE |
| Material Status | Commercial: Active |
| Features | Flame Characteristics |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.97 | g/cm³ | ASTM D792 |
| Apparent density | 1.13 | g/cm³ | Internal Method |
| Gel content | 60 | % | ASTM D2765 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strength retention rate | |||
| 158℃，1.91 mm | 100 | % | |
| Elongation retention rate | |||
| 158℃，1.91 mm | 120 | % |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Geon® 1169 |
| 3. Crosslinked PE, Method A (Referee Test) |
| 4. 672 hr, UL Standard |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |