| About |
|---|
| T-Blend® 5292N-PE is a Thermoplastic Elastomer (TPE) product. It is available in Asia Pacific. Typical application: Consumer Goods. Characteristics include: Eco-Friendly/Green Good Processability Good Tear Strength Non-Toxic&& |
| Product Description | |
|---|---|
| Supplier | TSRC |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Renewable resources,Good tear strength,Nontoxicity,Good coloring |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.870 to 0.910 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 180℃，5.0kg | 5.0 to 17 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 49 to 53 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 5.20 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 620 | % | ASTM D412 |
| tear strength | 28.4 | kN/m | ASTM D624 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 170 to 190 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |