| About |
|---|
| T-Blend® 6594B-WGD75 is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) product. It is available in Asia Pacific. Applications of T-Blend® 6594B-WGD75 include engineering/industrial parts and sealing applications. Characteristics include: Eco-Friendly/Green Good Flexibility Halogen Free UV Resistant Weather Resistant&& |
| Product Description | |
|---|---|
| Supplier | TSRC |
| Generic | SEBS |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good flexibility,Renewable resources,Halogen free,Ozone resistance |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.19 to 1.23 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 180℃，5.0kg | 2.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 72 to 76 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 5.79 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 270 | % | ASTM D412 |
| tear strength | 29.4 | kN/m | ASTM D624 |
| Compression deformation | |||
| 70℃，22 hr | 38 | % | ASTM D395 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 200 to 220 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |