| About |
|---|
| T-Blend® TPR-F78B是一种苯乙烯-乙烯-丁烯-苯乙烯嵌段共聚物(SEBS)产品,。 它,在亚太地区有供货。 T-Blend® TPR-F78B的应用领域包括包装、电影、体育用品 和 医疗/保健。 特性包括: 环保/绿色 加工性能良好 具可灭菌性 良好的柔韧性 耐低温性&& |
| Product Description | |
|---|---|
| Supplier | TSRC |
| Generic | SEBS |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Excellent Processability,Good flexibility,Good disinfection,Renewable resources,Antifreeze,Moisture Permeability,Soft,Nontoxicity |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.11 to 1.15 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 180℃，5.0kg | 20 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 76 to 80 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 6.08 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 480 | % | ASTM D412 |
| tear strength | 52.0 | kN/m | ASTM D624 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 160 to 220 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |