| About |
|---|
| TAFMER™ A-0550S is a Polyalphaolefin (PAO) material. It is available in North America. Primary attribute of TAFMER™ A-0550S: Good Flexibility.&& |
| Product Description | |
|---|---|
| Supplier | Mitsui |
| Generic | PAO |
| Material Status | Commercial: Active |
| Features | Good flexibility |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.861 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | ASTM D1238 | ||
| 190℃，2.16kg | 0.50 | g/10min | ASTM D1238 |
| 230℃，2.16kg | 0.90 | g/10min | ASTM D1238 |
| Mooney viscosity | |||
| ML 1+4 | 65 | MU | JIS K6395 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 58 | ASTM D2240 | |
| tensile strength | |||
| fracture | > 5.00 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 1000 | % | ASTM D638 |
| Torsional Rigidity | 2.00 | MPa | ASTM D1043 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -70.0 | ℃ | ASTM D746 |
| Melting temperature | < 50.0 | ℃ | ASTM D2117 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | > 1.0E+17 | ohms·cm | ASTM D257 |
| Dielectric constant | 2.20 to 2.40 | ASTM D150 | |
| Dissipation factor | < 5.0E-4 | ASTM D150 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |