TAFMER™ A-4085

About
TAFMER™ A-4085 is a Polyalphaolefin (PAO) material. It is available in North America. Typical application of TAFMER™ A-4085: Food Contact Applications&&

Product Description
Supplier	Mitsui
Generic	PAO
Material Status	Commercial: Active
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.880	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	3.6	g/10min	ASTM D1238

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-70.0	℃	ASTM D746
Vicat Softening Temp	55.0	℃	ASTM D1525

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	1.0E+18	ohms·cm	ASTM D257
Dielectric strength	55	kV/mm	ASTM D149
Dielectric constant	2.10		ASTM D150
Dissipation factor	1.3E-4		ASTM D150

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.