| About |
|---|
| TAFMER™ XM-5070, propylene based polymer, is a specialty olefinic resin designed to improve heat sealing behavior of Polypropylene (PP) based film.&& |
| Product Description | |
|---|---|
| Supplier | Mitsui |
| Generic | PAO |
| Material Status | Commercial: Negative |
| Features | Good Clarity,Good heat sealing |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | ASTM D1238 | ||
| 190℃，2.16kg | 3.0 | g/10min | ASTM D1238 |
| 230℃，2.16kg | 7.0 | g/10min | ASTM D1238 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 75.0 | ℃ | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 52 | ASTM D2240 | |
| Tensile modulus | 290 | MPa | ASTM D638 |
| tensile strength | ASTM D638 | ||
| yield | 11.0 | MPa | ASTM D638 |
| fracture | 34.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 750 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |