| About |
|---|
| Product Description | |
|---|---|
| Generic | ABS |
| Material Status | Commercial: Active |
| Features | HB |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.04 | g/cm³ | ASTM D792 |
| Melt Flow Rate | ASTM D1238 | ||
| 200℃，5.0kg | 1.0 | g/10min | ASTM D1238 |
| 220℃，10.0kg | 11 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| 3.2mm | 0.40-0.70 | % | ASTM D-955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Bending modulus | |||
| 23℃ | 2845 | MPa | ASTM D790 |
| bending strength | |||
| 23℃ | 87 | MPa | ASTM D790 |
| tensile strength | 50 | MPa | ASTM D638 |
| Rockwell hardness | |||
| R-level | 110 | ASTM D785 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，6.4mm | 276 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed, 12.7 mm | 85.0 | ℃ | ASTM D648 |
| 1.8 MPa, annealed, 80/80 | 94.0 | ℃ | ISO 75-2/A |
| Vicat Softening Temp | 104 | ℃ | ASTM D1525 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | File No. E162823 | |
| 1.5mm, all colors | HB | File No. E162823 | |
| 3.0mm, all colors | HB | File No. E162823 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |