TAIRIPRO B8001

About
Extrusion CHARACTERISTICS: Excellent impact strength, Excellent resistance to low temp., Brittleness, Good luster&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Impact copolymer
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	0.30	g/10min	ASTM D1238
Shrinkage rate
MD：23℃	1.5 to 1.9	%	Internal Method

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-20℃，3.2mm	110	J/m	ASTM D256
23℃，3.2mm	No Break		ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed, 6.35 mm	105	℃	ASTM D648

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Yield, 23 ℃	26.5	MPa	ASTM D638
Tensile strain
Fracture, 23 ℃	> 200	%	ASTM D638
Bending modulus
23℃	1080	MPa	ASTM D790-A
Rockwell hardness
R-level	80		ASTM D785

Process Conditions
Extrusion	Nominal value	Unit	Test method
Nozzle temperature	190 to 210	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.