| About |
|---|
| TAISOX® 7320M is an Ethylene Vinyl Acetate Copolymer (EVA) material. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of TAISOX® 7320M are: Chemical Resistant Copolymer Crosslinkable Good Flexibility Typical application of TAISOX® 7320M: Foam&& |
| Product Description | |
|---|---|
| Supplier | fpc-tw |
| Generic | EVA |
| Material Status | Commercial: Active |
| Features | Good flexibility,Crosslinked,High elastic,Copolymer,Solvent resistance |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.930 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 4.0 | g/10min | ASTM D1238 |
| Vinyl acetate content | 9.0 | wt% | |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 30 | µm |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -70.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 74.0 | ℃ | ASTM D1525 |
| Melting temperature | 96.0 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 96 46 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| yield | 5.88 | MPa | ASTM D638 |
| fracture | 13.7 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 700 | % | ASTM D638 |
| Bending modulus | 24.5 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |