| About |
|---|
| TAISOX® 7660M is an Ethylene Vinyl Acetate Copolymer (EVA) material. It is available in Asia Pacific, Europe, or North America for extrusion coating or injection molding. Important attributes of TAISOX® 7660M are: Copolymer Crosslinkable Good Aesthetics Good Processability Good Sealability Typical applications include: Coating Applications Foam&& |
| Product Description | |
|---|---|
| Supplier | fpc-tw |
| Generic | EVA |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good flexibility,Good heat sealing,Crosslinked,Optical performance,Copolymer |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.940 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 20 | g/10min | ASTM D1238 |
| Vinyl acetate content | 20.0 | wt% | |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 30 | µm |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -70.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 60.0 | ℃ | ASTM D1525 |
| Melting temperature | 83.0 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 32 83 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| yield | 2.94 | MPa | |
| fracture | 10.8 | MPa | |
| Tensile strain | |||
| fracture | 800 | % | ASTM D638 |
| Bending modulus | 12.7 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |