| About |
|---|
| Taitarex® 666 is a High Impact Polystyrene material. It is available in Asia Pacific or North America for injection molding. Important attributes of Taitarex® 666 are: Flame Rated Good Processability High Flow Impact Resistant Typical applications include: Appliances Business/Office Goods&& |
| Product Description | |
|---|---|
| Supplier | Taita |
| Generic | PS (HIPS) |
| Material Status | Commercial: Active |
| Features | Excellent Processability,High impact resistance,High liquidity,Good color stability,HB |
| Availabilitys | North America,Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.04 | g/cm³ | ASTM D542 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 7.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 23℃，3.18 mm | 26.5 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃, 3.18 mm | 45 | % | ASTM D638 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256A | ||
| 23℃ | 78 | J/m | ASTM D256-A |
| 23℃ | 88 | J/m | ASTM D256-A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 99.0 | ℃ | ASTM D1525 6 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 1.60 mm | HB | UL 94 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Yellowness index | -3.0 | YI |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Residual monomer | |||
| SM | < 600 | ppm |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Barrel rear temperature | 160 to 280 | °C | |
| Barrel middle temperature | 160 to 280 | °C | |
| Barrel front temperature | 160 to 280 | °C | |
| Mold temperature | 35 to 65 | °C | |
| Injection pressure | 49.0 to 137 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.20 in/min |
| 3. 1/4″x1/2″x5/2″ |
| 4. 1/8″x1/2″x5/2″ |
| 5. 3 mm thick |
| 6. Rate B (120°C/h), Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |