Taizhou Phenolic PF2A4-151J

About
Taizhou Phenolic PF2A4-151J is a Phenolic material. It is available in Asia Pacific for injection molding. Typical applications include: Appliances Automotive Electrical/Electronic Applications Handles Wire & Cable&&

Product Description
Supplier	Changxiong
Generic	酚醛树脂
Material Status	Commercial: Active
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	< 1.45	g/cm³	Internal Method
Shrinkage rate	0.60 to 0.90	%	ISO 2577
Water absorption rate	< 50.0	mg	Internal Method

MECHANICAL	Nominal value	Unit	Test method
bending strength	> 85.0	MPa	Internal Method

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	> 1.7	kJ/m²	Internal Method
Charpy Unnotch Impact strength	> 4.5	kJ/m²	Internal Method

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	> 170	℃	Internal Method

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	> 1.0E+11	ohms	Internal Method
Volume resistivity	> 1.0E+12	ohms·cm	Internal Method
Dielectric strength	> 10	kV/mm	Internal Method
Dissipation factor	< 0.050		Internal Method

Process Conditions
injection	Nominal value	Unit	Test method
Barrel rear temperature	70 to 80	°C
Barrel front temperature	90 to 100	°C
Mold temperature	165 to 180	°C
Injection pressure	80.0 to 160	MPa
Back pressure	1.00 to 3.00	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.